Display and measure the PLETH signal and the pulse per minute
Memory to store the patient’s 24-hour history
LCD and battery capacity display
6 hour battery charge
Adjustable audio and visual alarms
Product Specifications
Portable monitor used to measure continuous and non-invasive oxygen saturation of arterial blood (spo2%)
A backlight ccft display with a resolution of 64 x 240 pixels.
Display of spo2% and PR parameters and waveform Plethy smograph waveform and pulse intensity section.
The internal speaker is for voice alert notification as well as pulse beep sound for each beat.
Ability to set the range of visual and audio alarms
24-hour Trend memory for Parameter% SPO2 and PR
Powerful 20W power supply, as well as lithium-ion rechargeable internal battery with capacity of MAH1800 and operating time of 3 hours.
The use of various pulse oximeter probes such as BASIC and silicon or Y-sensor for infants (optional), and the system uses a wavelength of 660 nm for red LEDs and 940 nm for infrared LEDs.
Various LED indicators for connecting AC power to the battery status and alarms indicator.
The alarms that are set on the LCD are display.
Setting the amplitude of the amplitude of the waveform (Gain): 1/2, 1/1, 2, 4, and Auto.
Adjustable waveform speed (Sweep): 12.5 and 25 mm / sec
Set the date and time that will remain in memory when shutting down the system.
The accuracy of spo2% measurement varies between 70 and 100 is ±2 and the resolution is 1.
The accuracy of PT measurement is ±2 bpm and its resolution is 1bpm. The PR range is also 25 to 30 BPM.
It can Freeze the waveform.
The dimensions of the system are 24 * 18 * 9 (height * width * length) cm and system weight is 3 kg
